Introduction
More than any other attachment, a snow blower has to match your exact tractor, and getting it wrong is the most common and most expensive mistake buyers make. A blower built for one tractor series will not bolt onto another without the right parts. The subframe, the drive components, the hitch, and the required kits are all specific to the machine, and a used blower that looks right can turn out to need parts your tractor does not have. On the prairies, where a blower is often the difference between clearing a long driveway once and fighting it all winter, matching the right one to your tractor matters.
This guide is built to answer one question: which factory snow blower fits your tractor, and what else you need to run it. It works through the two mounting types, then goes series by series through Kubota and John Deere compact and utility tractors, pointing to the specific blower for each and the kits it requires. Where a model has a real cost surprise in its mounting kit, we flag it, because the blower’s own price is often only part of what you pay.
If you run a Kubota BX, B, Grand L, or LX, or a John Deere 1 or 2 Series, this guide points you to the blower built for your machine and tells you what it takes to mount it.
Why Fitment Is the Whole Question with Snow Blowers
A blade or a bucket is forgiving. A snow blower is not, and there are a few reasons why.
A factory snow blower is engineered for a specific tractor series, with a subframe and driveline matched to that machine. Front-mount blowers need a front hitch and a way to drive the blower, either a mid-PTO routed forward or a hydraulic drive, and those components differ between a sub-compact and a compact tractor. Three-point blowers need the right hitch category and rear PTO. Use the wrong mount or shaft and the blower will not fit, or will not fit safely. This is why a blower is never just a width and a photo: it is a package of blower, hitch, driveline, and sometimes completion kits, all specified for your exact tractor and model year.
The cost side matters too. On several tractors, the hitch and PTO kit needed to run a front blower add a significant amount to the blower’s own price, sometimes enough to change which option makes sense. Buyers who price only the blower are often caught off guard at the dealer. The safe approach, especially when shopping used, is to confirm the blower, subframe, driveline, and any kits are specified for your exact tractor and year before buying, and to price the whole package rather than the blower alone. Your dealer can confirm the complete setup your tractor needs.
Front Mount or Rear Mount?
Before the series-by-series breakdown, the first fork in the road is mounting type, because it shapes everything else.
A front-mount snow blower sits ahead of the tractor, driven by a front PTO or hydraulics, so you drive forward into the snow with a clear view of the work. It is the more intuitive setup for driveways and precise clearing, and it is what most compact tractor owners choose. The trade-off is that front mounting needs a front hitch and a front drive, which is where most of the fitment complexity and cost sits. Most of the Kubota and John Deere blowers in this guide are front-mount.
A rear-mount, or three-point, snow blower attaches to the three-point hitch and runs off the rear PTO, so you clear snow in reverse or looking behind you. It is often less expensive, mounts using the standard three-point hitch rather than a model-specific front subframe, handles larger blowers, and can move between tractors more easily. The trade-off is working in reverse and less precise visibility. For a broader look at how mounting types and snow tools compare, see the tractor snow blowers category and the snow removal attachments guide.
Kubota BX Series (Sub-Compact)
The BX sub-compact tractors take compact front-mount blowers, and there are two to choose from depending on how much snow you clear.
For a standard BX setup, the Kubota BX2816 is a 50-inch, two-stage front blower sized to the BX’s width and power, mid-PTO driven, needing the correct front subframe for your BX model. It suits residential and acreage driveways where snow needs to be thrown clear.
For heavier or more frequent clearing, the Kubota BX2822A is a 55-inch commercial-grade blower with hydraulic chute rotation as standard, and it fits both BX80 and B01 tractors using the K-Connect four-point hitch. Its fitment carries a cost worth knowing: on a BX80 it needs the BX2810 hitch and BX2811 PTO system, and on a B01 it needs the B3410 hitch and B3411 PTO kit, each a separate cost on top of the blower. Budget for the kit as well as the blower.
If you run a BX, the Kubota BX series comparison covers the tractors, including the BX23S, BX2380, and BX2680.
Kubota B Series (Compact)
The B-series compact tractors run larger front blowers than the BX, matched to their extra power.
The Kubota B2782B is a 63-inch, two-stage front blower with hydraulic chute rotation and deflection, built for B-series tractors with the correct subframe and driveline. It is one of the more common compact tractor blowers, and it is worth knowing that related designations like the earlier B2782 and B2782A exist, with subframes matched to different tractors, so confirm the exact version and subframe for your machine, especially when buying used.
The commercial Kubota BX2822A also fits B01 tractors with the B3410 hitch and B3411 PTO kit, if you want a hydraulic-chute commercial unit on a B01. If you run a B-series tractor, the Kubota B2601 page and the wider Kubota tractors compared guide cover the machines, including the B2301 and B2401.
Kubota Grand L Series
The Grand L tractors handle the widest of Kubota’s compact-tractor front blowers.
The Kubota L2195A is a 72-inch, two-stage front blower matched to the Grand L’s power, and it clears a wide path in one pass, which saves time on long driveways and large yards. Because of its size, it needs the correct subframe, driveline, and any completion kits for your Grand L tractor, and a used unit may require completion kits to run on a given machine, so confirm the full setup before buying. If you run a Grand L, the Kubota Grand L70 series comparison covers the tractors and how the models line up.
Kubota LX Series
The LX tractors take a full-width front blower, and this is the one where the mounting kit cost matters most.
The Kubota LX2963 is a 63-inch, two-stage front blower using the K-Connect four-point hitch, with hydraulic chute rotation standard. The blower itself is one cost, but on an LX3520 or LX4020 the tractor needs a mid-PTO cassette, the K-Connect module, and the LX6971 hitch to run it, which together add well over the blower’s own price. On an LX2620 the kit is different and less involved. This is the clearest example in the lineup of why you price the whole package: the working total on a larger LX lands far above the blower’s sticker. If you run an LX, the Kubota LX3520, LX4020, and LX2620 pages cover the tractors.
John Deere 1 and 2 Series
John Deere offers two front-mount blowers for its 1 Series and smaller 2 Series compact tractors, and the choice between them comes down to width and fitment.
The John Deere 47-inch snow blower is a two-stage front unit that fits the 1023E, 1025R, 1026R, and model year 2017 and newer 2025R, along with some X Series and the older 425, 445, and 455 tractors. The John Deere 54-inch snow blower clears seven more inches per pass on the same 1 and 2 Series tractors, but it is not compatible with the 425, 445, and 455. Both need a front Quick-Hitch, a front PTO to drive the blower, and the hydraulic connections for chute control, and older 2025R and 2032R tractors need a front-attaching support kit. Budget for the hitch and front PTO alongside the blower, and confirm your model year.
If you run a John Deere compact tractor, the John Deere 1025R and 1023E pages cover the 1 Series, the 2025R and 2032R cover the 2 Series, and the 1 vs 2 Family comparison explains where the two series divide.
Rear-Mount Option for a Wider Range of Tractors
If you would rather avoid a front subframe, or want a blower that is not tied to one tractor’s front end, a three-point rear blower is the flexible choice.
The Kubota BLMX3164 is a 64-inch rear three-point blower driven by the rear PTO at 540 rpm. Because it mounts on the standard three-point hitch rather than a model-specific front subframe, it fits a wider range of tractors, as long as your tractor has the right hitch category and enough PTO horsepower to drive it. The trade-off, as with any rear blower, is clearing snow in reverse rather than with the forward visibility of a front unit. It is a sensible option for owners who want capable clearing without committing to a front setup, or who may move the blower between tractors.
How to Confirm Fitment Before You Buy
Whatever tractor and blower you are matching, a short checklist saves trouble and money.
Start with your exact tractor model and year, since fitment often splits by model year, as it does on the 2025R. Confirm the blower is specified for that tractor, down to the model rather than the series. Add up the required components: the hitch, the driveline or front PTO, and any completion or support kits, and get the installed cost rather than the blower price alone. Check the mounting type suits how you want to work, front for visibility, rear for flexibility and lower cost. And if you are buying used, be especially careful that the subframe and driveline came from a compatible tractor, since these are matched to specific machines and are the parts most likely to be wrong. Your dealer can confirm the complete package for your exact tractor, which is always worth doing before you buy.
Frequently Asked Questions
Will any snow blower fit my tractor?
No. Factory snow blowers are matched to specific tractor series, with a subframe and driveline built for that machine. A blower for one series often will not fit another without the correct mount, shaft, and completion kits, if it fits at all. Always confirm the blower is specified for your exact tractor model and year before buying, especially when shopping used.
What snow blower fits a Kubota BX?
The Kubota BX2816, a 50-inch front blower, is the standard match for BX sub-compact tractors. For heavier clearing, the commercial BX2822A fits BX80 and B01 tractors, though it needs the BX2810 hitch and BX2811 PTO system on a BX80. Both are front-mount and need the correct subframe for your BX model.
What snow blower fits a Kubota LX3520 or LX4020?
The Kubota LX2963, a 63-inch front blower using the K-Connect hitch. On an LX3520 or LX4020 the tractor needs a mid-PTO cassette, the K-Connect module, and the LX6971 hitch to run it, which add well over the blower’s own price. Budget for the full package, beyond the blower alone.
What snow blower fits a John Deere 1025R?
Both the John Deere 47-inch and 54-inch front snow blowers fit the 1025R. The 47-inch is lighter and fits a wider range of tractors, while the 54-inch clears more per pass. Both need a front Quick-Hitch, a front PTO, and hydraulic chute connections. Confirm your tractor’s model year with your dealer.
How much do the mounting kits add to the price?
It varies by tractor, and on some it is significant. On a Kubota LX3520 or LX4020, the mid-PTO cassette, K-Connect module, and hitch together add well over a thousand dollars beyond the blower. On a BX80 or B01, the K-Connect hitch and PTO kit for the BX2822A are a separate cost too. Always price the hitch and driveline alongside the blower.
Is a front-mount or rear-mount snow blower better?
It depends on your priorities. Front-mount gives better visibility and is more intuitive, driving forward into the snow, but needs a front hitch and drive, where most of the cost and fitment complexity sits. Rear-mount three-point blowers are often cheaper, mount on the standard hitch, and fit more tractors, but you clear snow in reverse. Front suits precise driveway work; rear suits flexibility and lower cost.
Can I put a snow blower from an older tractor on my new one?
Only if the subframe and driveline match your new tractor, which often they do not. Subframes and drive components are matched to specific tractor series and model years, so a blower from an older or different tractor may need different mounting parts, or may not fit at all. Confirm compatibility with your dealer before buying a used unit.
Keep Comparing
- Tractor snow blowers: the full category, with front versus rear mounting explained.
- Snow removal attachments guide: how blowers compare to blades and pushers.
- Kubota tractors compared and John Deere 1 vs 2 Family compared: the tractors these blowers fit.
Note: We try our best to keep specs and information accurate, but some details can be missing or different depending on the source. Before you buy, service, or repair equipment, please double-check key specs and fitment with the manufacturer, the owner’s manual, or your dealer.
About reviews: Reviews on Aglist are written by real users. We moderate them for spam and abuse, but opinions and claims are still personal, so use them as guidance, not as a guarantee.
