Kubota Z725KH-3-60 Zero Turn Mower Reviews, Specs & Ratings

The Kubota Z725KH-3-60 is the 60-inch commercial step-up in Kubota’s Z700 lineup — engineered for serious commercial operators needing larger deck productivity with full commercial-tier construction. Powered by the 25 HP Kohler Command PRO engine (a meaningful step up from the 23.5 HP on Z724 models) and built around a 60-inch heavy-duty 6-inch deep, 8-gauge steel commercial mower deck, the Z725KH-3-60 delivers serious daily commercial productivity for Canadian landscape contractors, property maintenance operations, and commercial properties needing both deck width and commercial-grade durability.

The Z725KH-3-60 represents a meaningful engineering progression over the entry Z724KH-3-54. Beyond the larger 60-inch deck, the Z725 introduces several refinements that distinguish it as a true step-up commercial machine: 6-inch deep deck construction (vs 5-inch on Z724), sealed greaseless spindle bearings for reduced maintenance, fuel tank located under the seat for better stability and center of gravity, large-diameter wide tread rear tires for better traction, and organized service points under the seat panel including battery, harness, fuel shutoff, and fuses.

For Canadian commercial operators handling larger commercial properties, municipalities, golf course rough cutting, cemeteries, and high-volume commercial mowing contracts, the Z725KH-3-60 delivers the increased deck width and engine power needed for daily production work. The combination of 25 HP Kohler Command PRO commercial engine, dual Parker HTG14 commercial transmissions, and the 11.6-gallon fuel tank enables full-day commercial operation without performance compromise.

Key features include the 60-inch heavy-duty 6-inch deep 8-gauge steel commercial mower deck with three blades, 25 HP Kohler Command PRO V-twin engine (commercial-grade), dual Parker HTG14 commercial transmissions, 11.6-gallon fuel tank under the seat for stability, quick dial cutting height adjustment (1-5 inch range), sealed greaseless spindle bearings for reduced maintenance, large-diameter wide tread rear tires, high-back adjustable commercial seat, foldable ROPS with seatbelt, open engine compartment for service access, and Kubota’s 3-year / unlimited hours warranty.

Canadian pricing typically ranges $13,500-$15,500 CAD depending on dealer and configuration. The Z725KH-3-60 prices similarly to the Z724XKW-3-54 with X-package — choice between them comes down to whether you prioritize the larger 60-inch deck (Z725KH-3-60) or the X-package suspension seat (Z724XKW-3-54).

For broader context on Kubota’s full Z-Series lineup, see our Kubota Z Series Compared buyer’s guide.

Aglist advantage: Use the Z725KH-3-60 Reviews & Ratings section below to compare real Canadian commercial operator feedback on the 25 HP Kohler vs 23.5 HP alternatives, 60-inch productivity advantages, and long-term value vs stepping up to Z726 or Z781 production-class models.

Quick Specs

• Equipment type: Step-up commercial zero-turn mower (60-inch class)
• Manufacturer: Kubota Canada
• Model: Z725KH-3-60
• Series: Z700 (commercial, 3rd generation)
• Engine: Kohler Command PRO V-twin, air-cooled
• Engine HP: 25 HP
• Fuel system: Carbureted (Command PRO standard)
• Type: 2-cylinder, air-cooled, gasoline
• Deck size: 60 inches (8-gauge steel, 6-inch deep, 3 blades)
• Cutting height range: 1-5 inches (quick dial adjustment system)
• Transmissions: Dual Parker HTG14 (commercial-grade hydrostatic)
• Fuel tank capacity: 11.6 gallons (43.9 L) — located under seat for stability
• Spindle bearings: Sealed, greaseless (reduced maintenance)
• Rear tires: Large-diameter wide-tread for traction
• Seat: High-back adjustable commercial seat
• ROPS: Foldable Rollover Protection Structure with seatbelt
• Deck attachment: Two-pin quick-removal for service access
• Engine compartment: Open design for easy maintenance access
• Service access: Battery, harness, fuel shutoff, fuses under seat panel
• Recommended use: Commercial production / larger commercial properties
• Annual duty cycle: 200-500+ hours typical commercial use
• Warranty: 3 years / unlimited hours (full machine and powertrain)
• Approximate CAD price: $13,500-$15,500 depending on dealer

Reviews & Ratings on Aglist

Factory specifications tell you what the Kubota Z725KH-3-60 is engineered to do. Real owner reviews tell you whether Kubota’s step-up commercial 60-inch with Kohler delivers the daily productivity and long-term durability that justifies its position over the entry Z724KH-3-54.

What Z725KH-3-60 buyers consistently want to know:

• Is the step up from 23.5 HP / 54-inch Z724 to 25 HP / 60-inch Z725 worth the price premium?
• How does the 6-inch deep deck on Z725 compare to the 5-inch deep deck on Z724?
• Real-world productivity gain from 60-inch deck vs 54-inch in commercial use?
• Do sealed greaseless spindle bearings actually reduce maintenance meaningfully?
• 25 HP Kohler Command PRO performance in heavy Canadian commercial grass?
• How does the under-seat fuel tank affect stability and center of gravity?
• Z725KH-3-60 vs Z726XKW-3-60 — meaningful differences worth the X-package premium?
• Long-term value vs competitor 60-inch commercial alternatives (Scag/Exmark/Toro)?

This is where real Canadian commercial operator experience matters most. The Z725KH-3-60 represents the step-up from entry commercial to mid-commercial class — where many commercial buyers make the decision between staying at 54-inch or moving up to 60-inch. Owner reviews on this page help future buyers understand whether the productivity gain justifies the premium.

What Makes the Z725KH-3-60 Different

Three engineering decisions define the Z725KH-3-60 within Kubota’s Z700 commercial lineup.

25 HP Kohler Command PRO (Step Up from Z724’s 23.5 HP)

The Z725KH-3-60 uses Kohler Command PRO at 25 HP — a meaningful step up from the 23.5 HP versions on Z724 models. The extra 1.5 HP matters for the larger 60-inch deck:

• Better blade tip speed maintenance under heavy grass loads
• Less RPM drop in thick or wet conditions
• More consistent productivity through varied grass conditions
• Better hilly terrain performance with extra power reserve
• Higher operating speed sustainable in heavy grass

For commercial operators running the larger 60-inch deck, the extra engine power is genuinely useful rather than just spec marketing — the 25 HP keeps the 60-inch deck operating at full productive speed across more conditions than the 23.5 HP would maintain.

6-Inch Deep Commercial Deck Construction

The Z725KH-3-60 introduces 6-inch deep deck construction — distinguishing it from the 5-inch deep decks on Z724 commercial models. The deeper deck delivers:

• Better clipping discharge — more internal volume for clippings to move through the deck before discharge
• Improved cut quality in heavy grass — clippings have more room to be processed by the blades
• Better mulching capability — deeper deck creates more efficient air movement for clipping breakdown
• Reduced clumping in wet or thick conditions
• More uniform discharge across the full deck width

For commercial operators dealing with varied Canadian grass conditions (heavy spring growth, thick summer rye, wet fall conditions, fall leaf mulching), the 6-inch deep deck makes a meaningful daily difference in productivity and cut quality.

Sealed Greaseless Spindle Bearings

The Z725KH-3-60 features sealed, greaseless spindle bearings — a meaningful commercial maintenance upgrade. Traditional grease-fitting spindles require:

• Regular grease service (typically every 25 hours commercial use)
• Specific grease type per manufacturer spec
• Manual labor at each service interval
• Risk of over-greasing (causing seal damage) or under-greasing (causing bearing wear)

Sealed greaseless bearings eliminate this routine entirely:

• No grease service required for the entire spindle life
• No grease fittings to maintain
• Reduced service time at maintenance intervals
• More consistent bearing performance (no over/under-grease issues)
• Longer service life when proper sealing maintained

For commercial operators running daily duty cycles, the reduced spindle maintenance saves meaningful time across the machine’s service life — typically 1-2 hours per year of saved maintenance compared to traditional grease-fitting spindle designs.

25 HP Kohler Command PRO Engine

The Kohler Command PRO 25 HP engine deserves dedicated explanation as the Z725KH-3-60’s signature power upgrade.

Engine Specifications

• Type: Kohler Command PRO V-twin, air-cooled, 4-stroke
• Horsepower: 25 HP (gross)
• Cooling: Air-cooled with pressurized lubrication
• Fuel system: Carbureted (Command PRO standard)
• Construction: Cast-iron cylinder liners, heavy-duty crankshaft
• Service intervals: Standard Kohler commercial schedule
• Starting: Electric start with safety interlocks

Why Command PRO at 25 HP Matters

Kohler’s Command PRO lineup specifically targets commercial-grade applications. At 25 HP, the engine delivers:

• Higher peak power for the larger 60-inch deck
• Better torque characteristics under continuous commercial load
• Long service life — typically 2,500-4,500+ hours commercial use
• Consistent performance through full-day operation
• Pressurized lubrication with full-flow filtration

The 25 HP rating provides meaningful headroom for the 60-inch deck — the engine doesn’t have to work near its peak output to maintain blade tip speed, which directly extends engine service life.

Industry Comparison

The Kohler Command PRO is one of two commercial-grade engine families Kubota uses across the Z700 lineup. The competitive context:

• Used across competitor commercial mowers (Toro, Bad Boy, Hustler, others)
• Strong North American parts network
• Established commercial reputation spanning 30+ years
• Predictable maintenance schedules with well-documented intervals

For Canadian buyers, Kohler’s commercial network provides strong parts and service support across all provinces.

Engine Maintenance Schedule

Following Kohler’s commercial service schedule:

• Oil changes: Every 100 hours commercial use (vs 50 hours residential)
• Oil filter: Every 100-200 hours per duty cycle
• Air filter: Inspect every 25 hours; replace per spec
• Spark plugs: Replace per Kohler schedule
• Fuel filter: Annual replacement
• Cooling fins: Clean weekly during heavy commercial use
• Valve adjustment: Per Kohler commercial schedule

60-Inch 6-Inch Deep Commercial Deck

The 60-inch 6-inch deep deck deserves dedicated explanation because it’s the central productivity differentiator vs Z724 commercial alternatives.

Deck Construction Details

• 60-inch cutting width (vs 54-inch on Z724 models)
• 6-inch deep welded structure (vs 5-inch on Z724)
• 8-gauge steel commercial fabrication (same as Z724)
• Three commercial-grade blades for clean even cut
• Sealed greaseless spindle bearings (Z725 upgrade)
• Easy-pin attachment — two-pin removal for service
• Quick dial cutting height adjustment (1-5 inch range)

Productivity Math: 60-Inch Commercial Deck

At commercial operating speeds (8-10 mph):

• Approximately 2.4-3 acres per hour with commercial-quality overlap
• 5 acres in approximately 1.7-2.1 hours productive commercial mowing
• Full 8-hour commercial day: 20-25 acres with breaks

60-Inch vs 54-Inch Productivity Math

The productivity advantage of the 60-inch deck over the 54-inch alternative:

• 12.5% more coverage per pass
• Approximately 4-6 hours saved per season for typical commercial operators
• More acres per fuel tank at the same operating speed
• Reduced total operating hours for the same total acres

For Canadian commercial contractors with larger property portfolios, the 60-inch productivity premium directly translates to more billable revenue per machine over the season.

6-Inch vs 5-Inch Deep Deck

The deeper 6-inch deck provides meaningful operational advantages:

• Better clipping handling — larger internal volume
• Improved cut quality in heavy grass
• Better mulching performance
• Reduced clogging in wet conditions
• More uniform discharge across deck width

For commercial mowing through varied Canadian grass conditions, the deeper deck delivers visibly better cut quality particularly on heavy spring growth and wet conditions.

Sealed Greaseless Spindle Bearings

The sealed greaseless spindle bearing system on the Z725KH-3-60 is a meaningful commercial maintenance upgrade worth explaining in detail.

How Sealed Greaseless Bearings Work

Traditional mower deck spindles use:

• Ball bearings with grease fittings
• Regular grease service required (every 10-25 hours typical)
• Specific grease type per manufacturer spec
• Risk of contamination from improper service

Sealed greaseless bearings use:

• Permanently sealed bearing assemblies
• Factory-lubricated for full service life
• No grease fittings or service points
• Better contamination resistance through superior sealing

Practical Benefits for Commercial Operators

For commercial operators running 200-500+ hours annually:

Reduced maintenance time:

• No grease service at each maintenance interval
• 5-10 minutes saved per spindle per service
• 3 spindles × 15-25 services per year = 30-60 minutes saved annually

More consistent performance:

• No risk of under-grease wear or over-grease damage
• Consistent bearing condition through service life
• Predictable spindle behavior

Longer service life when sealed:

• Properly sealed bearings often last 3,000+ hours
• Matches typical commercial machine service life
• May outlast the machine’s other commercial components

Limitations

Sealed greaseless bearings have some considerations:

• Cannot be re-lubricated — when bearings wear, replacement is required
• Damage to seal requires bearing replacement (no grease repair)
• Premium replacement cost vs traditional bearing replacement
• Requires bearing puller for replacement vs simple grease service

For commercial operators, the operational benefits typically outweigh these considerations — the maintenance time savings and consistent performance pay back over the machine’s service life.

Fuel Tank Under Seat & Service Access

The Z725KH-3-60 introduces several service access improvements distinguishing it from entry Z724 commercial models.

Fuel Tank Under Seat

The 11.6-gallon fuel tank is located under the operator seat rather than in a separate fuel tank assembly. Practical benefits:

• Lower center of gravity — improved hillside stability
• Better weight distribution — improved handling balance
• Protected fuel tank — less exposure to impact damage
• Cleaner machine appearance — no separate fuel tank assembly visible
• Easier access for fuel level checking through fuel cap

Organized Service Points Under Seat Panel

Several key service items are organized under the seat panel for easy access:

• Battery — accessible by raising seat panel for charging or replacement
• Wiring harness — organized for easy diagnostic access
• Fuel shutoff — accessible for service procedures
• Fuses — organized for electrical diagnostic work

For commercial operators servicing fleets, this organized service layout saves meaningful diagnostic and repair time compared to scattered service points on competitor designs.

Engine Compartment Access

The open engine compartment design provides:

• Direct access to vital components without obstruction
• Easy air filter service without disassembly
• Spark plug access without complex teardown
• Visual inspection capability during normal operation
• Faster commercial maintenance intervals

Best Applications for the Z725KH-3-60

The Z725KH-3-60 fits a specific Canadian commercial buyer profile.

Best fit for the Z725KH-3-60:

• Commercial landscape contractors with larger property portfolios
• Property maintenance operations requiring 60-inch productivity
• Municipal mowing operations with daily commercial duty cycles
• Cemetery and large institutional grounds maintenance
• Golf course rough cutting operations
• Larger commercial property maintenance (industrial complexes, large retail)
• Operators preferring Kohler Command PRO with higher 25 HP rating
• Buyers valuing reduced maintenance (sealed spindle bearings)
• Operations with open commercial spaces where 60-inch productivity matters

Less suitable for:

• Properties with gate constraints under 60 inches — step down to Z724XKW-3-48 or Z724XKW-3-54
• Operators wanting X-package suspension seat — consider Z726XKW-3-60 (Kawasaki + X-package)
• Residential commercial routes — the 48-inch Z724XKW-3-48 is more appropriate
• Pure residential use — the prosumer Z452KWTi-60 offers EFI engine at similar pricing

The honest assessment: the Z725KH-3-60 is the right answer for commercial operators needing 60-inch productivity with full commercial-grade construction and Kohler engine preference. The combination of larger deck, higher HP, deeper deck construction, and sealed spindle bearings makes it a meaningful step up from Z724 entry commercial — appropriate for serious commercial operations.

Z725KH-3-60 vs Z724KH-3-54 vs Z726XKW-3-60

The Z725KH-3-60 is most-commonly cross-shopped against the entry Z724 commercial and the X-package Z726.

Feature	Z724KH-3-54	Z725KH-3-60	Z726XKW-3-60
Engine	Kohler Command PRO 23.5 HP	Kohler Command PRO 25 HP	Kawasaki FX 25.5 HP
Deck Size	54 in	60 in	60 in
Deck Depth	5 in	6 in	6 in
Deck Construction	8-gauge steel	8-gauge steel	8-gauge steel
Transmissions	Dual Parker HTG14	Dual Parker HTG14	Dual Parker HTG14
Fuel Tank	11.6 gal	11.6 gal (under seat)	11.6 gal (under seat)
Spindle Bearings	Standard	Sealed greaseless	Sealed greaseless
Seat	Standard high-back commercial	Standard high-back commercial	X-package Premium Suspension
Cutting Height	1-5 in	1-5 in	1-5 in
Foldable ROPS	Standard	Standard	Standard
Warranty	3 yr / unlimited hours	3 yr / unlimited hours	3 yr / unlimited hours
Approx CAD Price	$11,500-$13,000	$13,500-$15,500	$15,500-$17,000

Choose the Z724KH-3-54 if budget is primary and 54-inch deck is adequate. Best value entry commercial.

Choose the Z725KH-3-60 if you need 60-inch productivity with Kohler engine and standard commercial seat. Step-up commercial with premium deck.

Choose the Z726XKW-3-60 if you want 60-inch deck with Kawasaki engine and X-package suspension seat. Top of Z700 with X-package.

The Z724KH-3-54 vs Z725KH-3-60 decision turns on whether you need 60-inch productivity. Both share commercial-grade construction. The Z725 adds: larger deck, 1.5 HP more engine power, 6-inch deep deck construction, sealed spindle bearings, and refined service access. For larger commercial operations, the Z725 productivity gains justify the premium.

The Z725KH-3-60 vs Z726XKW-3-60 decision turns on engine preference and X-package suspension seat value. Same deck size and 60-inch productivity in both. Choose Kohler (Z725) or Kawasaki+X-package (Z726).

For the full Kubota Z-Series comparison, see our Kubota Z Series Compared guide.

Maintenance & Long-Term Ownership

The Z725KH-3-60 has a moderate commercial maintenance profile — slightly reduced from Z724 due to sealed spindle bearings.

Commercial Routine Maintenance Schedule

• Daily (before operation): Visual inspection, fuel check, tire pressure, deck clearance
• Every 25 hours: Air filter inspection, deck inspection (NO spindle grease — sealed bearings)
• Every 100 hours: Engine oil and filter change (Kohler Command PRO commercial schedule)
• Every 100 hours: Blade inspection and sharpening (3 blades)
• Every 200 hours: Hydrostatic transmission fluid inspection (Parker HTG14)
• Every 200 hours: Belt inspection and replacement as needed
• Every 400 hours: Spark plug replacement
• Annually: Full commercial inspection per Kubota schedule
• Annually: Parker transmission fluid replacement

Typical Wear Part Replacement Costs (Canadian Pricing)

• Commercial mower blades (set of 3 for 60″ commercial deck): $100-$200 CAD per replacement
• Engine oil + filter (Command PRO commercial-grade): $45-$80 CAD per change
• Air filter: $35-$65 CAD per replacement
• Spark plugs (Command PRO set): $30-$60 CAD per set
• Drive belts (60-inch deck): $70-$140 CAD per belt
• Battery: $90-$180 CAD per replacement (every 4-6 years commercial use)
• Parker HTG14 transmission fluid: $50-$80 CAD per transmission service
• Sealed spindle bearings: $150-$300 CAD per spindle when replacement eventually needed

Long-Term Commercial Ownership Economics

Typical 10-year cost of ownership for commercial operator (300 hours/year average):

• Purchase: $13,500-$15,500 CAD
• Annual fuel (commercial use): $1,400-$2,200 CAD
• Annual maintenance: $400-$700 CAD
• Wear parts (10 years): $2,800-$4,800 CAD
• Total 10-year commercial cost: Approximately $44,000-$60,000 CAD

The Z725KH-3-60 typically delivers 3,000-5,000+ hours of commercial service life. The sealed spindle bearings and refined service access reduce annual maintenance time compared to Z724 alternatives.

Frequently Asked Questions

Where can I read Kubota Z725KH-3-60 reviews and ratings?

On Aglist, the Reviews & Ratings section helps Canadian buyers compare owner feedback on the 60-inch commercial deck performance, 25 HP Kohler reliability, and long-term commercial ownership impressions.

Is the Kubota Z725KH-3-60 made in Canada?

The Z725KH-3-60 is assembled in the USA with Japanese engineering from Kubota Corporation. Sold and serviced through Kubota Canada’s authorized commercial dealer network across all provinces.

What’s the difference between Z724KH-3-54 and Z725KH-3-60?

The Z725KH-3-60 is a meaningful step up:

• Engine: 25 HP Kohler Command PRO (vs 23.5 HP on Z724KH)
• Deck size: 60 inches (vs 54 inches)
• Deck depth: 6 inches deep (vs 5 inches on Z724)
• Spindle bearings: Sealed greaseless (vs standard grease-fitting on Z724)
• Service access: Improved under-seat layout
• Price: $13,500-$15,500 CAD (vs $11,500-$13,000 for Z724KH)

Both share dual Parker HTG14 transmissions, 11.6-gallon fuel tank, 8-gauge steel deck construction, and 3-year unlimited hour commercial warranty.

Is the step up from Z724 to Z725 worth it?

For commercial operators with larger property portfolios, yes. The 60-inch deck productivity gain (12.5% more coverage per pass), 6-inch deep deck construction (better cut quality in heavy grass), 25 HP engine (better performance under load), and sealed spindle bearings (reduced maintenance) collectively pay back over commercial duty cycles. For operations primarily on 48-inch gated properties, the step up may not be appropriate.

What does “Z725” mean vs “Z724”?

Z725 designates the larger 60-inch deck commercial model with 25 HP engine. Z724 designates the 54-inch deck commercial model with 23.5 HP engine. Both are within the Z700 commercial 3rd-generation lineup.

How meaningful is the 6-inch deep deck vs 5-inch?

For commercial mowing through varied Canadian conditions, meaningful. The deeper deck provides:

• Better clipping discharge in heavy grass
• Improved cut quality in wet conditions
• Better mulching performance
• Reduced clumping in fall leaf conditions
• More uniform appearance across the cut

For lighter residential commercial routes, the difference is less pronounced. For heavy commercial production work, the 6-inch deep deck shows real advantages.

What property size is the Z725KH-3-60 designed for?

The Z725KH-3-60 is engineered for commercial duty cycles rather than specific residential acreage. For commercial contractors, it’s appropriate for larger commercial property portfolios. For serious residential use, it’s overpowered for properties under 5 acres but appropriate for larger estates with significant mowing needs.

Will the 60-inch deck fit through my gate?

The 60-inch deck (with deck raised) requires gates approximately 60 inches wide minimum with adequate clearance. Most residential fence gates max out at 60 inches. For 54-inch or smaller gates, consider the Z724KH-3-54 or Z724XKW-3-48. Measure your specific gate width before purchase.

Do the sealed greaseless spindle bearings really matter?

For commercial operators running 200-500+ hours annually, yes. The eliminated grease service saves 30-60 minutes annually per service, plus eliminates the risk of over/under-grease damage. The bearings typically last the full commercial service life of the machine without replacement.

Can I get the Z725 with X-package suspension seat?

The Z725KH-3-60 ships with the standard high-back commercial seat, not the X-package. For 60-inch deck with X-package suspension seat, consider the Z726XKW-3-60 (Kawasaki + X-package).

What’s the typical price of the Kubota Z725KH-3-60 in Canada?

As of 2026, the Z725KH-3-60 typically ranges $13,500-$15,500 CAD depending on dealer and configuration. Admin fees and freight typically add $300-$500 CAD. Confirm current pricing with your local Kubota Canada dealer.

How long does a Kubota Z725KH-3-60 last?

The Z725KH-3-60 typically delivers 3,000-5,000+ hours of commercial service life. The 25 HP Kohler Command PRO engine, Parker HTG14 transmissions, and sealed spindle bearings are all engineered for continuous commercial duty. For commercial operators running 300 hours/year, this translates to 10-17+ years of service life.

How does the under-seat fuel tank affect operation?

The under-seat fuel tank provides several practical benefits:

• Lower center of gravity for better hillside stability
• Better weight distribution for improved handling
• Protected location for the fuel tank
• Easier fuel level checking through cap location

Some operators initially question the under-seat placement, but in practice it improves machine stability and handling without operational downsides.

Can the Z725KH-3-60 handle slopes?

The low center of gravity (improved by under-seat fuel tank) and wide operator platform provide excellent stability. The foldable ROPS with seatbelt provides rollover protection when raised and locked. Kubota’s commercial slope guidance applies: mow straight up/down rather than sideways, reduce speed on slopes and turns, avoid slopes over 15 degrees.

How does Kohler Command PRO 25 HP compare to Kawasaki FX 25.5 HP on Z726?

Both are excellent commercial-grade engines with similar service life (2,500-4,500+ hours commercial). The slight HP difference (0.5 HP) is marginal in real use. Choice typically comes down to engine brand preference, local dealer parts inventory, and whether you want the X-package suspension seat (only on Kawasaki Z726XKW-3-60).

What’s the warranty on the Z725KH-3-60?

Kubota Canada backs the Z725KH-3-60 with a 3-year / unlimited hours warranty covering both full machine and powertrain. Unlike residential warranty terms with potential hour limits, the Z700 commercial warranty has no hour cap. Wear items (blades, belts, filters, tires) are not covered.

Reviews & Ratings on Aglist

Share your experience

Help other Canadian buyers — leave a quick review for the Kubota Z725KH-3-60.

Similar Equipment

• Kubota Z724KH-3-54 — step-down to 54-inch entry commercial with Kohler
• Kubota Z726XKW-3-60 — same 60-inch deck with Kawasaki engine and X-package suspension
• Kubota Z724XKW-3-54 — 54-inch with X-package as alternative to 60-inch standard
• Kubota Z Series Compared — complete buyer’s guide for all Kubota Z-Series models

Note: We try our best to keep specs and information accurate, but some details can be missing or different depending on the source. Before you buy, service, or repair equipment, please double-check key specs with the manufacturer, the owner’s manual, or your dealer.

About reviews: Reviews on Aglist are written by real users. We moderate them for spam and abuse, but opinions and claims are still personal—so use them as guidance, not as a guarantee.